-
-
-
AIRCAT 1in Low Weight Impact Wrench 1in Drive 2100 Ft Lbs Torque
AIRCAT 1in Low Weight Impact Wrench 1in Drive 2100 Ft Lbs Torque
- 1in. drive low-weight impact wrench delivers 2100 ft./lbs. of maximum torque and an unmatched power-to-weight ratio
- Low weight impact-resistant housing provides all-day comfort
- Features combined friction-ring and through-hole socket retainers
- Operates at 7500 RPM (no load); 1400 IPM in impact mode
- Styled for perfection and built to last
$587.00 -
Aircat Pistol Grip Air Impact Wrench 1in Drive 16 CFM 1700 Ft Lbs Torque
Aircat Pistol Grip Air Impact Wrench 1in Drive 16 CFM 1700 Ft Lbs Torque
- Delivers 1,700 ft.-lbs. max. torque and 1,900 ft.-lbs. loosening torque
- Provides 100–1,500 ft.-lbs. working torque
- Operates at 4,800 RPM free speed
- Delivers 900 IPM in impact mode
- Pinless hammer mechanism for superior reliability
$630.00 -
AIRCAT Pistol Impact Wrench 1in Drive 2000 Ft Lbs Torque
AIRCAT Pistol Impact Wrench 1in Drive 2000 Ft Lbs Torque
- Provides 2,000 ft.-lbs. max. torque
- Two-jaw clutch provides unparalleled torque output and increases the life of the hammer beyond standard impact mechanisms
- Two-jaw clutch and precision air motor dramatically reduce air consumption over standard 1in. impact wrenches to 24.5 CFM full load and 6.1 CFM average
- Operate at 4,200 RPM free speed; 1,200 IPM
- Rugged bolt-on side assist handle
$1,283.00 -
AIRCAT Super Duty Air Impact Wrench Kit 3/4in Drive 8 CFM 1400 Ft Lbs Torque
AIRCAT Super Duty Air Impact Wrench Kit 3/4in Drive 8 CFM 1400 Ft Lbs Torque
- Delivers 1400 ft.-lbs. max. torque
- Provides 100–1200 ft.-lbs. working torque
- Operates at 6500 RPM free speed
- Delivers 1300 IPM in impact mode
- Hard-hitting twin hammer mechanism delivers maximum power
$587.00 -
AIRCAT Vibrotherm Drive Composite Air Impact Wrench 1in Drive 2100 Ft Lbs Max Torque
AIRCAT Vibrotherm Drive Composite Air Impact Wrench 1in Drive 2100 Ft Lbs Max Torque
- 1in. drive wrench provides up to 2100 ft./lbs. of maximum torque
- Vibrotherm Drive® impact mechanism reduces vibration levels by 30%–40% and increases the life of the mechanism by 50%
- 6000 RPM free speed
- Unmatched power-to-weight ratio
- Rubber handle grip and rubberized trigger inserts for ultimate comfort
$639.00 -
AIRCAT Vibrotherm Drive Composite Air Impact Wrench With 7in Anvil 1in Drive 2100 Ft Lbs Max Torque
AIRCAT Vibrotherm Drive Composite Air Impact Wrench With 7in Anvil 1in Drive 2100 Ft Lbs Max Torque
- 1in. drive wrench provides up to 2100 ft./lbs. of maximum torque
- Vibrotherm Drive® impact mechanism reduces vibration levels by 30%–40% and increases the life of the mechanism by 50%
- 6000 RPM free speed
- Unmatched power-to-weight ratio
- 7in. anvil provides extra reach for tire work
$659.00 -
ALC Abrasive Blaster 90Lb Capacity
ALC Abrasive Blaster 90Lb Capacity
- Perfect for surface preparation on any type of irregular surfaces where other forms of preparation such as sanding are difficult
- Ideal for removing paint, rust, scale and oxidation on various surfaces
- Steel deadman shutoff handle along with adjustable flow valve and pressure-relieving ball valve provide the operator with complete control of abrasive blasting
- 80–125 psi operating range
- Minimum air volume of 7–15 CFM @ 80 psi
$952.00 -
ALC Abrasive Pressure Blaster 110Lb Capacity
ALC Abrasive Pressure Blaster 110Lb Capacity
- Perfect for surface preparation on any type of irregular surfaces where other forms of preparation such as sanding are difficult
- Ideal for removing paint, rust, scale, and oxidation on various surfaces
- Steel deadman shutoff handle along with adjustable flow valve and pressure-relieving ball valve provide the operator with complete control of abrasive blasting
- 80–125 psi operating range
- Minimum air volume of 7-15 CFM @ 80 psi
$749.00 -
ALC Abrasive Pressure Blaster 250Lb Capacity
ALC Abrasive Pressure Blaster 250Lb Capacity
- Perfect for surface preparation on any type of irregular surfaces where other forms of preparation such as sanding are difficult
- Ideal for removing paint, rust, scale and oxidation on various surfaces
- Steel deadman shutoff handle along with adjustable flow valve and pressure-relieving ball valve provide the operator with complete control of abrasive blasting
- 80–125 psi operating range
- Minimum air volume of 15–25 CFM @ 80 psi
$1,699.00 -
ALC Deadman Abrasive Blaster 150Lb Capacity
ALC Deadman Abrasive Blaster 150Lb Capacity
- Perfect for surface preparation on any type of irregular surfaces where other forms of preparation such as sanding are difficult
- Ideal for removing paint, rust, scale and oxidation on various surfaces
- Steel deadman shutoff handle along with adjustable flow valve and pressure-relieving ball valve provide the operator with complete control of abrasive blasting
- 80–125 psi operating range
- Minimum air volume of 15–25 CFM @ 80 psi
$949.00 -
ALC Polymer Floor Model Abrasive Blasting Cabinet 35in
ALC Polymer Floor Model Abrasive Blasting Cabinet 35in
- Perfect for surface preparation on any type of irregular surfaces where other forms of preparation such as sanding are difficult
- Ideal for removing paint, rust, scale and oxidation on various irregular surfaces
- 80–110 psi operating range
- Minimum air volume of 15 CFM @ 80 psi
- Replaceable self adhesive protective window underlay to protect and extend the life of the viewing window
$919.00 -
ALC Soda and Abrasive Blaster 110Lb Capacity
ALC Soda and Abrasive Blaster 110Lb Capacity
- Perfect for surface preparation on any type of irregular surfaces where other forms of preparation such as sanding are difficult
- Ideal for removing paint, rust, scale and oxidation on various surfaces
- Use the soda attachment to remove paint for automotive panels without warping or damaging the underlying surface
- Perfect for car restorations, no need to remove glass or chrome as soda will not damage these surfaces
- Includes both plumbing arrangements to switch back and forth between soda and regular abrasives, simply switch the plumbing out at the bottom of the tank
$1,260.00 -
ALC Soda and Abrasive Blaster 90Lb Capacity
ALC Soda and Abrasive Blaster 90Lb Capacity
- Perfect for surface preparation on any type of irregular surfaces where other forms of preparation such as sanding are difficult
- Ideal for removing paint, rust, scale and oxidation on various surfaces
- Use the soda attachment to remove paint for automotive panels without warping or damaging the underlying surface
- Perfect for car restorations, no need to remove glass or chrome as soda will not damage these surfaces
- Includes both plumbing arrangements to switch back and forth between soda and regular abrasives, simply switch the plumbing out at the bottom of the tank
$1,035.00 -
ALC Steel Abrasive Blasting Cabinet 36in
ALC Steel Abrasive Blasting Cabinet 36in
- Perfect for surface preparation on any type of irregular surfaces where other forms of preparation such as sanding are difficult
- Ideal for removing paint, rust, scale and oxidation on various irregular surfaces
- 80-125 psi operating range
- Minimum air volume of 15 CFM @ 80 psi
- Fully-welded construction with no seams or leak points helps keep the blasting operation contained inside the cabinet
$2,290.00ALC Steel Abrasive Blasting Cabinet 36in
$2,290.00 -
ALC Steel Abrasive Blasting Cabinet 48in
ALC Steel Abrasive Blasting Cabinet 48in
- Perfect for surface preparation on any type of irregular surfaces where other forms of preparation such as sanding are difficult
- Ideal for removing paint, rust, scale and oxidation on various irregular surfaces
- 80-125 psi operating range
- Minimum air volume of 15 CFM @ 80 psi
- Fully-welded construction with no seams or leak points helps keep the blasting operation contained inside the cabinet
$2,573.00ALC Steel Abrasive Blasting Cabinet 48in
$2,573.00 -
ALC Steel Abrasive Blasting Cabinet 60in
ALC Steel Abrasive Blasting Cabinet 60in
- Perfect for surface preparation on any type of irregular surfaces where other forms of preparation such as sanding are difficult
- Ideal for removing paint, rust, scale and oxidation on various irregular surfaces
- 80-125 psi operating range
- Minimum air volume of 15 CFM @ 80 psi
- Fully-welded construction with no seams or leak points helps keep the blasting operation contained inside the cabinet
$3,023.00ALC Steel Abrasive Blasting Cabinet 60in
$3,023.00 -
ALC Steel Abrasive Blasting Cabinet with LED Light Kit 36in
ALC Steel Abrasive Blasting Cabinet with LED Light Kit 36in
- Perfect for surface preparation on any type of irregular surfaces where other forms of preparation, such as sanding, are difficult
- Ideal for removing paint, rust, scale and oxidation on various irregular surfaces
- 80-125 psi operating range
- Minimum air volume of 15 CFM @ 80 psi
- Fully-welded construction with no seams or leak points helps keep the blasting operation contained inside the cabinet
$2,616.00 -
ALC Steel Abrasive Blasting Cabinet with LED Light Kit 48in
ALC Steel Abrasive Blasting Cabinet with LED Light Kit 48in
- Perfect for surface preparation on any type of irregular surfaces where other forms of preparation, such as sanding, are difficult
- Ideal for removing paint, rust, scale and oxidation on various irregular surfaces
- 80-125 psi operating range
- Minimum air volume of 15 CFM @ 80 psi
- Fully-welded construction with no seams or leak points helps keep the blasting operation contained inside the cabinet
$3,411.00 -
ALC Steel Abrasive Blasting Cabinet with LED Light Kit 60in
ALC Steel Abrasive Blasting Cabinet with LED Light Kit 60in
- Perfect for surface preparation on any type of irregular surfaces where other forms of preparation, such as sanding, are difficult
- Ideal for removing paint, rust, scale and oxidation on various irregular surfaces
- 80-125 psi operating range
- Minimum air volume of 15 CFM @ 80 psi
- Fully-welded construction with no seams or leak points helps keep the blasting operation contained inside the cabinet
$3,661.00 -
ALC Top and Side Door Opening Abrasive Blasting Cabinet 36in
ALC Top and Side Door Opening Abrasive Blasting Cabinet 36in
- Perfect for surface preparation on any type of irregular surfaces where other forms of preparation such as sanding are difficult
- Ideal for removing paint, rust, scale and oxidation on various irregular surfaces
- 80–125 psi operating range
- Minimum air volume of 15 CFM @ 80 psi
- Fully-welded construction with no seams or leak points helps keep the blasting operation contained inside the cabinet
$2,273.00 -
AllSource Abrasive Blast Cabinet 48in
AllSource Abrasive Blast Cabinet 48in
- Perfect for surface preparation on any type of irregular surfaces where other forms of preparation such as sanding are difficult
- Ideal for removing paint, rust, scale and oxidation on various irregular surfaces
- 80–110 psi operating range
- Minimum air volume of 15–20 CFM @ 80 psi
- Large viewing window measuring 12in. x 24in. gives the operator a wide viewing area
$2,499.00AllSource Abrasive Blast Cabinet 48in
$2,499.00 -
Allsource Abrasive Pressure Blast Cabinet 69in
Allsource Abrasive Pressure Blast Cabinet 69in
- Faster strip rates due to pressure pot design increases productivity 4 to 5 times over a typical siphon unit
- Pressure pot system with automatic refill means no stopping to refill the tank, simply release the foot pedal and the tank will refill on its own
- Foot pedal control for operator ease of use and to help reduce hand fatigue
- Oversized 29in. x 38in. front door with low loading point to easily load heavy and bulky items
- Large 44in.W x 34in.D x 35in.H work area for a variety of jobs
$3,699.00 -
Allsource Dual Station Abrasive Blasting Cabinet 71in
Allsource Dual Station Abrasive Blasting Cabinet 71in
- Dual station allows two operators to blast simultaneously, covering twice the area at the same time
- Large 33in.H x 46in.W x 49in.D work area means no long delays for moving blast items, operator can simply change stations
- Foot pedal control for easy operator use and to help reduce hand fatigue
- Oversized 29in. x 38in. front door with low loading point to easily load heavy and bulky items
- Heavy-duty 14 ga. steel construction
$3,499.00 -
Allsource Monster Abrasive Blast Cabinet 46in
Allsource Monster Abrasive Blast Cabinet 46in
- Perfect for surface preparation on any type of irregular surfaces where other forms of preparation such as sanding are difficult
- Ideal for removing paint, rust, scale and oxidation on various irregular surfaces
- 80–110 psi operating range
- Minimum air volume of 15–20 CFM @ 80 psi
- Extra-large viewing window measuring 30in. x 15in. gives the operator a wide viewing area
$2,499.00